This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 10-21-2015, 09:53 AM
whitebird whitebird is offline
Apprentice
 
Join Date: Jul 4 2009
Posts: 41
whitebird is on a distinguished road
Default Led Bulbs

Can I install LED bulbs in the tail light of my 65 Bird? These are the type that fit in the existing sockets. Concerned that brake lights & directionals will work with these.
Reply With Quote
  #2  
Old 10-21-2015, 10:22 AM
Joe Johnston Joe Johnston is offline
Super-Experienced
 
Join Date: Dec 23 2008
Posts: 662
Joe Johnston is on a distinguished road
Default

A qualified, "Yes you can" depending on the brand or style.

>due to the directional light output of LED's, they may focus the light straight back and not illuminate the entire area as well as the originals

>an electronic flasher may be required - but the original may work if the front turn signals are still original and draw enough current to make the original flasher unit function

>inline resistors may be used to eliminate the need to buy an electronic flasher

>this may not apply at all with sequential turn signals.

>I tried them on my 63 and went back to the 1257 as the old style bulbs were brighter because the light comes out all the way around and gets reflected from the bowl housing of a 63. Your application and LED style may be different and the only way to know is to try it and see if it meets your satisfaction.
Reply With Quote
  #3  
Old 10-22-2015, 12:11 AM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
 
Join Date: May 26 2009
Posts: 7,080
simplyconnected is on a distinguished road
Default

It depends on the 'bulbs' you buy and how you install them.

If you use your existing flasher unit, you need an 8-ohm resistor for each bulb to 'dump' most of the current so your flasher unit will work. The Parking Light side needs no resistor.

In addition to the resistors you need diodes in series with each filament so there will be no back feed to the 'other' bulbs on the same branch.

I made a video for one of our members in CA:

https://www.youtube.com/watch?v=XVL3Oy1y7V0

This video contains the drawing I made including bullet connectors, resistors and diodes.

Beware of cheap LED bulbs on eBay. I got some that stab in (modern wedge base) and the plastic bases melted. They used too small of wattage resistor in the base and it just cooked. The company sent me four more, so I altered them.

I like using arrays of 5050 LEDs. 5050=5mm X 5mm LEDs. If you look at a 5050 LED, it's actually three-in-one to give lots of light. - Dave
__________________
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote
  #4  
Old 10-22-2015, 04:46 PM
whitebird whitebird is offline
Apprentice
 
Join Date: Jul 4 2009
Posts: 41
whitebird is on a distinguished road
Default

Thanks guys, I' think I'll stay with the regular bulbs.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 01:10 PM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.