If this is your first visit, be sure to
check out the FAQ by clicking the
link. You must register
before you can post: click the register link to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
- remove rear seat base, will pop out of the mounting brackets when you pull up on the front of the seat squab. Don't be shy, you need a bit of strength.
- remove the seat back, 4 screws in total holding this in, when removed lift and remove the seat back.
- 4+ screws holding in the side panel, just remove them and the panel will come away - if power windows, easy, manual winders you need to remove the winder of course.
Comment