![]() |
|
Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]() Curious to know if anybody out there in Big Block Ford Land has knowledge of suppliers of new, used or NOS Chris Craft Marine water cooled exhaust manifolds for a FE 427 engine. To the best of my research and knowledge there is no aftermarket supplier of these marine manifolds. So my hope is to find a few used ones or NOS for a client of mine in my marine service business. Any leads are appreciated.
His existing manifolds are freeze cracked and first we'll have them brazed and hopefully that will effect a good repair. However if that brazing operation fails he'll need to replace the manifold(s).
__________________
Best Birding, Jed Zimmerman '58HT and '48 Dodge Panel in MN Thunderbird Registry #3810 VTCI#7652 |
#2
|
|||
|
|||
![]() fordfe.com . There are several guys over there running marine blocks and they may have some exh. manifolds. Mike
|
#3
|
|||
|
|||
![]() Another place to ask is here http://www.network54.com/Forum/424840/ There's an email address at the bottom to contact them. Good luck, Bob C
|
#4
|
|||
|
|||
![]() Thanks guys. I found lots of info there I can spend some time following up on and hopefully will get me to a solution, or at least increase my knowledge of marine water cooled manifolds for this CC Ford 427 engine.
__________________
Best Birding, Jed Zimmerman '58HT and '48 Dodge Panel in MN Thunderbird Registry #3810 VTCI#7652 |
![]() |
Thread Tools | |
Display Modes | |
|
|