This will take you to the main site where there is history, technical information and other information on these cars.
This takes you back to the main page of the forums.
This is the control panel to change your password, information and preferences on this message board.
Click here if your lost your password or need to register on this message board. You must be a registered user to post. Registration is free.
Search this board for information you need.
Click here to buy cool Squarebirds mechandise.
Click here to support Squarebirds.org. For $20 annually receive 20mBytes webspace, a Squarebirds e-mail address and member's icon on the message board.
  #1  
Old 07-10-2018, 02:16 PM
jopizz's Avatar
jopizz jopizz is offline
Excellent Auto Mechanic for over 40 years.
 
Join Date: Nov 23 2009
Posts: 5,629
jopizz is on a distinguished road
Default Steering Control Valve Tech Tip

I was speaking with Dave Hodges ~ ayrwoof who gave me a tip regarding leaking power steering control valves. It appears that Ford was having the same issue back in the 50's and 60's. According to someone he spoke to who worked at an Edsel/Lincoln-Mercury dealership the fix was to soak the seals in DOT3 brake fluid for 15-20 minutes before installing and install them still wet. After putting the valve together fill with Type F transmission fluid. He says he did this quite a few years ago on his '60 and his valve is still leak free. He also indicated that he got new seals from The O-Ring Store LLC: https://www.theoringstore.com/ The part number for the larger seal is 6226-07-E70. He did not have the part number for the smaller seal but they list many different Ford seal kits so it's best to give them a call.

John
__________________
John Pizzi - Squarebirds Administrator
1959 Convertible

Thunderbird Registry #36223
jopizz@verizon.net 856-779-9695

http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm
Reply With Quote
  #2  
Old 07-10-2018, 03:52 PM
Tbird1044 Tbird1044 is online now
Super-Experienced
 
Join Date: Jul 31 2012
Posts: 1,194
Tbird1044 is on a distinguished road
Default

This could be a great fix for a long time ongoing problem. I hope we get some feedback when some of the members try it. It should go in the TRL.
Nyles
Reply With Quote
  #3  
Old 07-10-2018, 05:03 PM
YellowRose's Avatar
YellowRose YellowRose is online now
Super-Experienced and a really nice guy!
 
Join Date: Jan 21 2008
Posts: 12,741
YellowRose is on a distinguished road
Default Steering Control Valve Tech Tip

I have just put this into the TRL in the Power Steering section. You will find it listed in the 2nd link down, •Squarebird Power Steering Rebuild & New Seals Kit. Clicking on that link will take you to the information below that Dave Hodges ~ arywoof provided John ~ jopizz with. I combined the two and modified the title slightly to indicate the seals were available also. Daro at The O-Ring Store (I will add them to the Advertisements Forum) told me that if someone can measure the smaller seal, Inside & Outside Diameter and send them a picture of it with those measurements, they may have that smaller seal also. You can email him at:

daro@theoringstore.com
__________________

Ray Clark - Squarebirds Administrator
'59 Tbird "The Yellow Rose Of Texas" aka "Tweety Bird"
"It's Hip To Be Square"
Thunderbird Registry #33025 VTCI #11178

Contact me via Private Message for my email address, or (Cell) 210-875-1411 (Home) 210-674-5781
http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm
Reply With Quote
  #4  
Old 07-10-2018, 05:44 PM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
 
Join Date: May 26 2009
Posts: 7,598
simplyconnected is on a distinguished road
Default

Wait a minute...
Seals and fluids must be compatible. Normally, seals made for use with DOT-3 will bloat terribly when exposed to petroleum-based products. We also found that silicone-based fluids can bloat certain seals.

'O' rings come in different rubber compounds. Some are neoprene, Viton, Buna-N, etc.

Do NOT buy any 'O'-ring and slap it in your steering system without knowing EXACTLY what it is or another teardown will certainly be in your near future.

It is a mistake to point to the TRL before knowing specifics about compatibility with our steering systems. - Dave
__________________
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote
  #5  
Old 07-10-2018, 06:14 PM
jopizz's Avatar
jopizz jopizz is offline
Excellent Auto Mechanic for over 40 years.
 
Join Date: Nov 23 2009
Posts: 5,629
jopizz is on a distinguished road
Default

As I pointed out Dave Hodges had success with certain seals that I referenced in my post. Since his rebuild has lasted multiple years without failure I will assume that the seals he used and the procedure he used was successful. We can only go by our members successes and failures. Any criticism of that is baseless in my opinion.

John
__________________
John Pizzi - Squarebirds Administrator
1959 Convertible

Thunderbird Registry #36223
jopizz@verizon.net 856-779-9695

http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm
Reply With Quote
  #6  
Old 07-10-2018, 06:24 PM
Tbird1044 Tbird1044 is online now
Super-Experienced
 
Join Date: Jul 31 2012
Posts: 1,194
Tbird1044 is on a distinguished road
Default

Good point Dave. I looked at theoringstore website and used the part number John listed and it showed it was made from EPDM. Then on the compatibility list, it shows it is recommended for brake fluid and not recommended for auto trans fluid. Hmm? The recommended for trans fluid was viton, Buna-N or kalrez. Of the 3, kalrez was the only one highly recommended for both fluids. Very expensive and may not be available in the sizes needed. I wonder what material Ford used on the original seals?
I think most of the commercial seal sealants in the cans at the auto stores are designed to chemically make the old seals swell. Guess this would be a long term test is someone tries it.
Nyles
Reply With Quote
  #7  
Old 07-10-2018, 06:38 PM
jopizz's Avatar
jopizz jopizz is offline
Excellent Auto Mechanic for over 40 years.
 
Join Date: Nov 23 2009
Posts: 5,629
jopizz is on a distinguished road
Default

Quote:
Originally Posted by Tbird1044 View Post
Guess this would be a long term test is someone tries it.
Nyles
The fact that Dave Hodges installed that seal many years ago and it hasn't leaked tells me that neither the brake fluid nor the Type F transmission fluid did it any harm. That's a lot longer than most people are getting out of new seals without soaking them beforehand. I know that from personal experience.

John
__________________
John Pizzi - Squarebirds Administrator
1959 Convertible

Thunderbird Registry #36223
jopizz@verizon.net 856-779-9695

http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm
Reply With Quote
  #8  
Old 07-11-2018, 02:02 PM
simplyconnected's Avatar
simplyconnected simplyconnected is offline
Slow Typist
 
Join Date: May 26 2009
Posts: 7,598
simplyconnected is on a distinguished road
Default

John, with all due respect to you and Dave, I must defer to the experts who make 'O'-rings. Parker Hannifin has always been Ford's 'go-to' company. As Nyles pointed out, Parker has a handbook of compatibility because Parker makes 'O'-rings.

They show a listing for Type 'A; Transmission oil but I would call them for other types (like Type 'F'). Here's what they say:
Attached Images
File Type: jpg ParkerOrings.jpg (138.6 KB, 58 views)
__________________
My latest project:
CLICK HERE to see my custom hydraulic roller 390 FE build.

"We've got to pause and ask ourselves: How much clean air do we need?"
--Lee Iacocca
Reply With Quote
  #9  
Old 07-11-2018, 02:08 PM
jopizz's Avatar
jopizz jopizz is offline
Excellent Auto Mechanic for over 40 years.
 
Join Date: Nov 23 2009
Posts: 5,629
jopizz is on a distinguished road
Default

With all due respect something that has worked in a practical application for multiple years trumps any list you can provide. If I worked on cars solely based on what it says on paper and not by trial and error I wouldn't be much of a mechanic.

John
__________________
John Pizzi - Squarebirds Administrator
1959 Convertible

Thunderbird Registry #36223
jopizz@verizon.net 856-779-9695

http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm
Reply With Quote
  #10  
Old 07-11-2018, 08:24 PM
YellowRose's Avatar
YellowRose YellowRose is online now
Super-Experienced and a really nice guy!
 
Join Date: Jan 21 2008
Posts: 12,741
YellowRose is on a distinguished road
Default Steering Control Valve Tech Tip

Thanks to John ~ jopizz, we have been doing some research on these seals. John happens to have a few of them, one for the 1958 Spool small end and one for the 1958-1960 Spool large end with an EP45 number on it. That appears to be a Eaton Product Part #, according to Daro at The O-Ring Store. With the measurements and pix that John provided, Daro was able to tell me what their Part # was for those two additional seals. Here is that information.

The O-Ring Store Seal Part #'s

1958-1960 Thunderbird Power Steering Control Valve Seals - Used on 1958-1965 Tbirds (so I read).

1958 Spool small end - 5/8" ID x 7/8" OD - 1/8" C/S - HRU12-0.62-12 Buna-N - 0 In stock but they can get them.

https://www.theoringstore.com/index....=HRU12-0.62-12

1959-1960 Spool small end - 1/2" ID x 7/8" OD x 3/16" C/S - 6226-07-E70. An EPDM seal - 408 In stock

https://www.theoringstore.com/index....rd=6226-07-E70

1958-1960 Spool large end - 11/16" ID x 7/8" OD 3/32" HT - Part # EP45 - HRU09-0.68-09 Buna-N
0 In stock, but they can get them.

https://www.theoringstore.com/index....=HRU09-0.68-09

Daro said that instead of soaking them in brake fluid or Type F, to Use a PTFE Based Lubricant - Part # 21030

Buna-N 6226-07 good for petroleum based uses

https://www.theoringstore.com/index....&keyword=21030

Today, I spoke with Parker regarding the O-Ring Handbook not listing Transmission fluid Type F. What he told me was that Type F was not satisfactory to use either. Here is the information he gave me on page 3-11 of the Handbook.

Parker O-Ring Handbook

http://www.parker.com/literature/O-R...ORD%205700.pdf

For automatic transmission:
Medium: ATF oil (Automatic Transmission Fluid)
Compound: N0674-70, N0552-90, AA150-70,
AE152-70 (Vamac), V1164-75,
V0884-75 (brown)
__________________

Ray Clark - Squarebirds Administrator
'59 Tbird "The Yellow Rose Of Texas" aka "Tweety Bird"
"It's Hip To Be Square"
Thunderbird Registry #33025 VTCI #11178

Contact me via Private Message for my email address, or (Cell) 210-875-1411 (Home) 210-674-5781
http://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htm

Last edited by YellowRose : 07-11-2018 at 11:06 PM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 01:24 AM.

Driving, racing or working on cars can be hazardous. The procedures and advice on this website including the message board are opinion only. Squarebirds.org and its webmasters and contributors do not guarantee the correctness of the advice and procedures. The Squarebirds.org and its webmasters assume no liability for any damage, fines, punishment, injury or death resulting from following these procedures or advice. If you do not have the skills or tools to repair your car, please consult a professional. By using this site you agree to hold harmless the Squarebirds.org, its authors and its webmasters from any resulting claim and costs that may occur from using the information found on this site.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.