View Single Post
  #8  
Old 06-02-2013, 09:56 AM
KULTULZ
 
Posts: n/a
Post

Just a note here on FE and FT (330MD/330HD -361 -391) engines. The engine in this truck is a FT 330 MD (Medium Duty).

There was also a 330HD which came assembled with a steel crank (same as 361 - FE 352/360/361 EDSEL stroke).

These are the later cast blocks with strengthened main webbing and the HD engines came through with steel crankshafts. The upper end (heads-intake-front cover) are not useable but later FE parts are easily adapted.

NOTE-

Quote:
A STD 332 FE is 4.0 bore 3.30 stroke A STD 330FT is 3.875 bore 3.50 stroke
This is one heck of a deal on that truck. Wish I were closer...

Last edited by KULTULZ : 06-02-2013 at 10:25 AM. Reason: Clarify Information
Reply With Quote