If this is your first visit, be sure to
check out the FAQ by clicking the
link. You must register
before you can post: click the register link to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Can anyone help me find a supplier of rebuild kits for the trans, My reverse band is broken so will need that too.
thanks for any help.
(A Californian company would be closer)
What trans is on your 430? I bought a rebuild kit (including all the clutch disks) for my Cruise-O-Matic from Tee-bird.com. I'm sure Mac's have them too. - Dave
Those kits are available. But a word of caution; make sure your case isn't cracked. It usually happens at the center bolt boss:
Yep, the one just above where the drum sits (in the middle). If your case is ok, THEN get the kit. How many transmissions are you planning on rebuilding? - Dave Dare
Edit: I forgot to mention, bands usually cost around US$50 WITH EXCHANGE (because we rebuild them). Don't give up on tee-bird.com. Call them and speak with Ellis or Bill. You may mention my name.
The FX (small case) was used with most FORD engines. The MX (medium case) was used with larger engines and heavier cars. The HX (actually LX) (large case) was used with the LINCOLN.
The FORD-O-MATIC and later CRUISE-O-MATIC was mixed in use with the F/2/S, C4 and C6 according to the application. The FMX was a redesign in 1967 that combined the FX and MX in design.
Broader performance says FATSCO can supply kits , don't know price yet though.
Carl...your message may not be readable, please try
(same user name as before)@iprimus.com.au
I tried to email you before....you have changed internet provider as well I assume.
thanks for your help
Comment