I'm giving some thought to reverting my 390 FE from performance back to stock.
If I were to take out the CompCams performance cam and reinstall the stock cam, could I use the same hydraulic roller lifters with the stock cam?
In the process if re-degreeing the engine (the only hardware change being the cam), how likely is it that the pushrod lengths would stay the same?
Opinions and/or excoriations welcome. Thanks.
Cheers,
If I were to take out the CompCams performance cam and reinstall the stock cam, could I use the same hydraulic roller lifters with the stock cam?
In the process if re-degreeing the engine (the only hardware change being the cam), how likely is it that the pushrod lengths would stay the same?
Opinions and/or excoriations welcome. Thanks.
Cheers,
Comment