Booster brackets
I'll have to be real careful with my AC plenum removal then.
You did a very nice job on your bracket extension. That is kind of what I am thinking except I might just cut the bracket ears off that have the wrong bolt pattern and the studs, make new L-shaped brackets the right length and drilled with the existing firewall bolt pattern to weld back together and eliminate the extra set of bolts entirely. (And extend the rod to pedal also, if necessary)..
I doubt the 460 will go in easy, but I think it will go. If it is just too problematic I'll try the 400 (longer rods than a 460 and almost as much torque). Would probably be easiest to use the 351c, but hate to lose 100 ft-lbs of torque in a heavy car.
Mike
I'll have to be real careful with my AC plenum removal then.
You did a very nice job on your bracket extension. That is kind of what I am thinking except I might just cut the bracket ears off that have the wrong bolt pattern and the studs, make new L-shaped brackets the right length and drilled with the existing firewall bolt pattern to weld back together and eliminate the extra set of bolts entirely. (And extend the rod to pedal also, if necessary)..
I doubt the 460 will go in easy, but I think it will go. If it is just too problematic I'll try the 400 (longer rods than a 460 and almost as much torque). Would probably be easiest to use the 351c, but hate to lose 100 ft-lbs of torque in a heavy car.
Mike
Comment