Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   430 MEL Engine (http://squarebirds.org/vbulletin/forumdisplay.php?f=32)
-   -   fuel pump push rod (http://squarebirds.org/vbulletin/showthread.php?t=7646)

hale0007 11-03-2009 10:44 AM

fuel pump push rod
Replaced fuel pump with a rebuilt one, but still doesn't
draw fuel. Suspect push rod is worn, but how do you get it
out? Top cap appears press fitted, with no way to pry it
off. Have tried punching from below, only to dimple it! Have used plenty of penetrating oil. Any suggestions would be
appreciated. Assuming I need a new rod, are there any
sources, or do I need to get one machined? Thanks

Colo66 11-03-2009 05:14 PM

I think that the timing cover will have to be removed. Another thing to consider is that there was 2 different lenth of push rods. The MPC lists for 59/60 C1VE-9400-A, ID by 2 groves on the end, which is 4.881 long and for 60, C3VY-9400-B which is 4.810 long. The fuel pump for 59 was B8S-9350-A and C0LE-9350-A for 60 which was replaced by the earlier B8S-A pump. There was no mention of replacing the C3VY-B rod with the C1VE-A however. There has been some concerns that when the pump was changed it wouldnt pump enough fuel for the engine. This may be due in part to a pump/rod lenth mismatch. There were 2 fuel pumps style used for both years. Use the search function to find the discussion on this. If you have any questions just ask!

tbird430 11-03-2009 06:06 PM

Ask Bart (bcomo) too, he has "been here before".


65cobra03 11-06-2009 09:17 PM

fuel pump pushrod
You have to punch a hole in the pressed in cap & pry it out , After removal pound back in shape & solder up the hole & repaint if desired
I have been down this road & gave up after wasting time & money. a good electric fuel pump is the way to go . Instant starts as carb is immediatly primed & they are reliable. Be sure to follow installation instruction's as they push fuel instead of pulling, so pump must be level or below tank. The only other fix is a new pump cam & a MATCHING pushrod a tough combo to find & correctly ID & a lot of taking apart to boot.

hale0007 11-08-2009 11:51 AM


I may go for the electric fuel pump. If it has to be installed at
or below fuel tank level, where do you install? Not much room
between tank and wheel well. Thanks


65cobra03 11-09-2009 09:13 PM

fuel pump
I am still in northern ny The t- bird is in Fl I will check the exact location of electric pump & get back to you in a few week's i know it was tight but was not a big deal it's been three year's since i looked at it & have forgotten detail's of installation

tbird430 11-11-2009 05:59 PM

I've seen people hide them under the windshield washer bag...


Dan Leavens 11-11-2009 06:07 PM

Jon now that is a great idea that someone came up with, as I never thought of that one:eek:

scumdog 11-12-2009 12:30 AM

Most electric fuel pumps 'push' rather than 'pull' the fuel - hence why they are best fitted back nearest the fuel tank.

simplyconnected 11-13-2009 12:41 AM


Originally Posted by scumdog (Post 38899)
Most electric fuel pumps 'push' rather than 'pull' the fuel - hence why they are best fitted back nearest the fuel tank.

...and for good reasons. Modern pumps are IN the gas tank. They produce high pressure which eliminates vapor lock (no suction side). I like the idea of putting the electric pump as far back as possible; in that trunk void, just behind the rear wheels is good. I use the electric supply wires to disable the car. Hot wire the ignition any way you want, it's not going anywhere without gas.

All times are GMT -4. The time now is 08:14 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.