Has anyone used the high tech type of manifold gaskets made out of thick 1/8" carbon material on a 430? These are supposed to make up for any low spots.
The original type thin sheet metal gaskets seem to leak very slightly, and I have a chance to switch them now. The Fel-Pro gaskets are 1/2 asbestos and 1/2 metal, but I've never used those either.
Can anyone give some recommendations on what has worked or not worked?
Thanks
The original type thin sheet metal gaskets seem to leak very slightly, and I have a chance to switch them now. The Fel-Pro gaskets are 1/2 asbestos and 1/2 metal, but I've never used those either.
Can anyone give some recommendations on what has worked or not worked?
Thanks
Comment