Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum

Squarebirds, Rocketbirds, and Fifties/Sixties Ford Discussion Forum (http://squarebirds.org/vbulletin/index.php)
-   430 MEL Engine (http://squarebirds.org/vbulletin/forumdisplay.php?f=32)
-   -   Update - John's 430 website (http://squarebirds.org/vbulletin/showthread.php?t=9318)

orwin 07-26-2010 07:49 PM

Update - John's 430 website
 
1 Attachment(s)
Just finished adding a lot to my member website http://www.squarebirds.org/users/john_orwin/index.html

- Engine disassembly and reassembly sections. I am not an expert and if any members care to comment and nitpick - the feedback is welcome!

orwin 07-26-2010 07:54 PM

Sorry - did not notice that the original thread was moved to 430 MEL. This will probably be the last postings on the 430 for a while. I will be putting up details of the front and rear suspension, and rear end rebuilds. I'll leave it to the webmasters to decide where to put the post.

Regards,

Richard D. Hord 07-26-2010 09:08 PM

Hey John,
Engine looks awesome! Keep us posted!!!
Richard D. Hord

simplyconnected 07-26-2010 11:17 PM

I second Richard's post. That 430 looks massive and handsome on the stand. More, more, more!

I think I'll visit your site to see your new additions, John. - Dave

YellowRose 07-26-2010 11:25 PM

Update - John's 430 website
 
Hi John,

Yes, since it applied to the 430MEL engine, I moved it to the appropriate Forum. Great Stuff! I hope you do not mind me "borrowing" some of your pix here and on your web page to put in the 430MEL Picture Gallery! They will be a great addition to it for people to look at now and in the future.

tbird430 07-27-2010 12:51 PM

That 430cid looks fantastic!! Clean enough to eat off of!! :rolleyes:

Is you engine's oil dipstick & tube installed in this pic?

What brand spark plug wires did you go with-they look great too!

You are very brave going back with the original (non-AC) 4-blade cooling fan. Though it is correct for you Bird & really stands out too.

Heck, I only have GOOD things to say John. :) All I'd add is a generator mounted w/s washer "vaccum" pump...

-Jon in TX.

partsetal 07-28-2010 12:06 PM

John,
The finished motor sure looks good. The only nits I can find to pick are that there should be an additional plastic piece to organize the plug wires. It is held by the wires themselves, and it goes between the rocker arm cover and distributor. Also, it is difficult to see the metal line from the fuel filter to the carb.
In another post you indicated that you would change the fuel pump, but it looks right the way it is.
From the Lincoln parts book, the front cover is also listed as B9SZ-6019-A for the 58-9 Lincoln. (My book is 56-59). The oil fill tube for 58 is EDF-6754-A, and for 58-9 is listed PB8M-6754-A with the note: Use with PB8M-6750-A indicator when replacing EDF 6754-A on early 1958 Models. The 59 Models use the PB9M-6750-B indicator.
Yes, many of the Lincoln parts dealers have the 430 items, but they are way more expensive than the Tbird guys.
Carl

orwin 07-28-2010 06:56 PM

Carl,

Reading between the lines in your post re. the front cover/dipstick (indicator) issue, it sounds like there may have been more than one variety in use depending on when built or field replacement. The difference in length wouldn't matter as long as it's the right indicator for the tube.

FYI - I have the plastic combs for the plug wires, but was in a such a rush to get the motor ready for pictures that I forgot to put them on. Same thing with the tubes to the carb - I have them but didn't put them on. Note that GTE427 has asked me to send my original vacuum advance tube to Inline Tube for duplication. Stay posted on that.

Thanks for info,
John


All times are GMT -4. The time now is 11:11 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.