Anything I need to know in advance of removing rear seat on a '64 convertible? Simple? Hidden screws anywhere? Thank you!
Announcement
Collapse
No announcement yet.
Removing Rear Seat on the '64 Convertible
Collapse
X
-
Tags: None
-
Probably the same as the hardtop. Remove the side arm rests (two screws hidden behind plastic plugs). Remove the bench by pushing the bottom towards the trunk then pulling up. As I recall each upper half is fastened by two large sheet metal screws on the lower frame, hinged at the top. Then the center arm rests. -
The bottom of the seat just pulls out. The seat backs are held in place by bolts. It helps if you can remove the rear arm rests. I suggest that you invest in a shop manual. You can download one for less than $20 from various web sites.
JohnJohn Pizzi - Squarebirds Administrator
Thunderbird Registry #36223
jopizz@squarebirds.org 856-779-9695
https://www.squarebirds.org/picture_gallery/TechnicalResourceLibrary/trl.htmComment
-
-
Comment
Comment