Starter Issue. Major or Minor problem?
Spent the afternoon removing starter from 59 352.
The Bendix came out in pieces.
I can not find the "Anchor Plate" that holds the spring to the end of the shaft.
I can not locate it anyplace. I worry that it dropped into the flywheel housing.
Major risk to motor if this is the case?
Did you remove the bellhousing dust shield below the starter opening facing forward ?
You should be able to locate or fish out any of old starter drive parts.
Definitely remove the inspection cover and see if it comes out. I've seen them wedged between the flywheel and the bottom of the bell housing. It will at least damage your flywheel if you don't get it out.
I replaced the starter once for my dad,
decades ago (In a parking lot)
It was laying in the bottom of the bell hsg
|All times are GMT -4. The time now is 10:42 AM.|
Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Any submissions to this site and any post on this site becomes property of Squarebirds.org . The webmasters reserve the right to edit and modify any submissions to this site. All material on this is site is copyrighted by the Squarebirds.org. Reproduction by any means other than for personal use is strictly prohibited. Permission to use material on this site can be obtained by contacting the webmasters. Copyright 2002-2016 by Squarebirds.org.